Clinical drug
2.5 ML cyclophosphamide 200 MG/ML Injection
200 MG/ML · Injection · injection
A form of cyclophosphamide →
2.5 ML cyclophosphamide 200 MG/ML Injection — Nitrogen mustard analogues. INDICATIONS AND USAGE Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Di

Active ingredient
Classification
Nitrogen mustard analoguesAlkylating Drug
Drug interactions
Cyclophosphamide has several drug interactions that may enhance its toxicities or alter the effects of other medications.
- majorprotease inhibitors — increased concentration of cytotoxic metabolites and enhanced toxicities including infections, neutropenia, and mucositis
- majorradiation therapy or drugs with similar toxicities — potentiation of cyclophosphamide toxicities such as myelosuppression, nephrotoxicity, cardiotoxicity, pulmonary toxicity, secondary malignancies, and hepatotoxicity
- majormetronidazole — acute encephalopathy
- majortamoxifen — increased risk of thromboembolic complications
- moderatewarfarin — increased and decreased anticoagulant effect
- moderatecyclosporine — decreased serum concentrations of cyclosporine and increased incidence of graft-versus-host disease
- majordepolarizing muscle relaxants (e.g., succinylcholine) — prolonged apnea
Indications
INDICATIONS AND USAGE Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases : malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1 ) Minimal Change Nephrotic Syndrome in Pediatric Patients : biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2 ) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2 ) 1.1 Malignant Diseases Cyclophosphamide for Injection is indicated for the treatment of adult and pediatric patients with: malignant lymphomas (Stages III and IV of the Ann Arbor staging system), Hodgkin's disease, lymphocytic lymphoma (nodular or diffuse), mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma multiple myeloma leukemias: chronic lymphocytic leukemia, chronic granulocytic leukemia (it is usually ineffective in acute blastic crisis), acute myelogenous and monocytic leukemia, acute lymphoblastic (stem-cell) leukemia (Cyclophosphamide for Injection given during remission is effective in prolonging its duration) mycosis fungoides (advanced disease) neuroblastoma (disseminated disease) adenocarcinoma of the ovary retinoblastoma carcinoma of the breast Cyclophosphamide for Injection, although effective alone in susceptible malignancies, is more frequently used concurrently or sequentially with other antineoplastic drugs. 1.2 Minimal Change Nephrotic Syndrome in Pediatric Patients Cyclophosphamide for Injection is indicated for the treatment of biopsy proven minimal change nephrotic syndrome in pediatric patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy. Limitations of Use : The safety and effectiveness of Cyclophosphamide for Injection for the treatment of nephrotic syndrome in adults or other renal disease has not been established.
Dosage
DOSAGE AND ADMINISTRATION During or immediately after cyclophosphamide for Injection administration, administer adequate amounts of fluid to reduce the risk of urinary tract toxicity ( 2.1 ). Malignant Diseases: Adult and Pediatric Patients ( 2.2 ) Intravenous: Initial course for patients with no hematologic deficiency: 40 mg per kg to 50 mg per kg in divided doses over 2 to 5 days. Other regimens include 10 mg per kg to 15 mg per kg given every 7 to 10 days or 3 mg per kg to 5 mg per kg twice weekly. Oral: 1 mg per kg per day to 5 mg per kg per day for both initial and maintenance dosing. Minimal Change Nephrotic Syndrome in Pediatric Patients ( 2.3 ) Oral : 2 mg per kg daily for 8 to 12 weeks (maximum cumulative dose 168 mg per kg). Treatment beyond 90 days increases the probability of sterility in males. ( 8.4 ) 2.1 Important Administration Instructions During or immediately after the administration of cyclophosphamide for injection, adequate amounts of fluid should be ingested or infused to force diuresis in order to reduce the risk of urinary tract toxicity. Therefore, cyclophosphamide for injection should be administered in the morning. 2.2 Recommended Dosage for Malignant Diseases Adults and Pediatric Patients Intravenous Use When used as the only oncolytic drug therapy, the recommended dosage for the initial course of cyclophosphamide for injection for patients with no hematologic deficiency is 40 mg per kg to 50 mg per kg given intravenously in divided doses over a period of 2 to 5 days. Other intravenous regimens include 10 mg per kg to 15 mg per kg given every 7 to 10 days or 3 mg per kg to 5 mg per kg twice weekly. Oral Use The recommended dosage for oral cyclophosphamide is 1 mg per kg per day to 5 mg per kg per day for both initial and maintenance dosing. Adjust the dosage of cyclophosphamide for injection based on the specific regimen administered, response to treatment, myelosuppression or other adverse reactions, and patient risk factors [ see Warnings and Precautions (5) ] . 2.3 Recommended Dosage for Minimal Change Nephrotic Syndrome in Pediatric Patients The recommended dosage is 2 mg per kg orally once daily for 8 to 12 weeks (maximum cumulative dose 168 mg per kg) is recommended. Treatment beyond 90 days increases the probability of sterility in males [see Use in Specific Populations (8.4) ]. 2.4 Preparation, Handling, and Administration Cyclophosphamide for is a hazardous drug. Follow applicable special handling and disposal procedures. 1 Caution should be exercised when handling and preparing cyclophosphamide for injection. To minimize the risk of dermal exposure, always wear gloves when handling vials containing cyclophosphamide for injection. Cyclophosphamide for Injection Intravenous Administration Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Do not use cyclophosphamide for injection vials if there are signs of melting. Melted cyclophosphamide for injection is a clear or yellowish viscous liquid usually found as a connected phase or in droplets in the affected vials. Cyclophosphamide for injection does not contain any antimicrobial preservative and thus care must be taken to assure the sterility of prepared solutions. Use aseptic technique. For Direct Intravenous Injection Reconstitute Cyclophosphamide for Injection with 0.9% Sodium Chloride Injection, USP only, using the volumes listed below in Table 1. Shake the vial vigorously to dissolve the drug completely. Do not use Sterile Water for Injection, USP because it results in a hypotonic solution and should not be injected directly. Discard unused solution. Table 1: Reconstitution for Direct Intravenous Injection Strength Volume of 0.9% Sodium Chloride Cyclophosphamide for Injection Concentration 500 mg 25 mL 20 mg per mL 1 g 50 mL 2 g 100 mL For Intravenous Infusion Reconstitution of Cyclophosphamide for Injection: Reconstitute Cyclophosphamide for Injection using 0.9% Sodium Chloride Injection, USP or Sterile Water for Injection, USP with the volume of diluent listed below in Table 2. Add the diluent to the vial and shake the vial vigorously to dissolve the drug completely. Discard unused solution. Table 2: Reconstitution in preparation for Intravenous Infusion Strength Volume of Diluent Cyclophosphamide for Injection Concentration 500 mg 25 mL 20 mg per mL 1 g 50 mL 2 g 100 mL Dilution of Reconstituted Cyclophosphamide for Injection: Further dilute the reconstituted cyclophosphamide for injection solution to a minimum concentration of 2 mg per mL with any of the following diluents: 0.45% Sodium Chloride Injection, USP 5% Dextrose Injection, USP 5% Dextrose and 0.9% Sodium Chloride Injection, USP To reduce the likelihood of adverse reactions that appear to be administration rate-dependent (e.g., facial swelling, headache, nasal congestion, scalp burning), cyclophosphamide for injection should be injected or infused very slowly. Duration of the infusion also should be appropriate for the volume and type of carrier fluid to be infused. Storage of Reconstituted and Diluted Cyclophosphamide for Injection Solution If not used immediately, for microbiological integrity, cyclophosphamide for injection solutions should be stored as described in Table 3: Table 3: Storage of Cyclophosphamide for Injection Solutions Diluent Storage Room Temperature Refrigerated Reconstituted Solution (Without Further Dilution) 0.9% Sodium Chloride Injection, USP up to 24 hours Up to 6 days Sterile Water for Injection, USP Do not store; use immediately Diluted Solutions * 0.45% Sodium Chloride Injection, USP up to 24 hours up to 6 days 5% Dextrose Injection, USP up to 24 hours up to 36 hours 5% Dextrose and 0.9% Sodium Chloride Injection, USP up to 24 hours up to 36 hours * Storage time is the total time cyclophosphamide for injection is in solution including the time it is reconstituted in 0.9% Sterile Sodium Chloride Injection, USP or Sterile Water for Injection, USP. Reconstituted Solution for Oral Administration Liquid preparations of cyclophosphamide for oral administration may be prepared by dissolving cyclophosphamide for injection in Aromatic Elixir, National Formulary (NF). Store preparations under refrigeration in glass containers and use within 14 days. See the prescribing information for cyclophosphamide for oral use for additional dosage information. 2.1 Important Administration Instructions During or immediately after the administration of cyclophosphamide for injection, adequate amounts of fluid should be ingested or infused to force diuresis in order to reduce the risk of urinary tract toxicity. Therefore, cyclophosphamide for injection should be administered in the morning.
Warnings
WARNINGS AND PRECAUTIONS Myelosuppression, Immunosuppression, Bone Marrow Failure and Infections: Severe immunosuppression may lead to serious and sometimes fatal infections. Close hematological monitoring is required. ( 5.1 ) Urinary Tract and Renal Toxicity: Hemorrhagic cystitis, pyelitis, ureteritis, and hematuria can occur. Urotoxicity can be fatal. Exclude or correct any urinary tract obstructions prior to treatment. ( 5.2 ) Cardiotoxicity: Myocarditis, myopericarditis, pericardial effusion, arrythmias and congestive heart failure, which may be fatal, have been reported. Monitor patients, especially those with risk factors for cardiotoxicity or pre-existing cardiac disease. ( 5.3 ) Pulmonary Toxicity: Pneumonitis, pulmonary fibrosis and pulmonary veno-occlusive disease leading to respiratory failure may occur. Monitor patients for signs and symptoms of pulmonary toxicity. ( 5.4 ) Secondary malignancies ( 5.5 ) Veno-occlusive Liver Disease: Fatal outcome can occur. ( 5.6 ) Embryo-Fetal Toxicity: Can cause fetal harm. Advise patients of reproductive potential of the portential risk to a fetus and to use effective contraception. ( 5.7 , 8.1 , 8.3 ) 5.1 Myelosuppression, Immunosuppression, Bone Marrow Failure and Infections Cyclophosphamide can cause myelosuppression (leukopenia, neutropenia, thrombocytopenia and anemia), bone marrow failure, and severe immunosuppression which may lead to serious and sometimes fatal infections, including sepsis and septic shock. Latent infections can be reactivated [see Adverse Reactions ( 6.2 )] . Antimicrobial prophylaxis may be indicated in certain cases of neutropenia at the discretion of the managing physician. In case of neutropenic fever, antibiotic therapy is indicated. Antimycotics and/or antivirals may also be indicated. Monitoring of complete blood counts is essential during cyclophosphamide treatment so that the dose can be adjusted, if needed. Cyclophosphamide should not be administered to patients with neutrophils ≤1,500/mm 3 and platelets < 50,000/mm 3 . Cyclophosphamide treatment may not be indicated, or should be interrupted, or the dose reduced, in patients who have or who develop a serious infection. G-CSF may be administered to reduce the risks of neutropenia complications associated with cyclophosphamide use. Primary and secondary prophylaxis with G-CSF should be considered in all patients considered to be at increased risk for neutropenia complications. The nadirs of the reduction in leukocyte count and thrombocyte count are usually reached in weeks 1 and 2 of treatment. Peripheral blood cell counts are expected to normalize after approximately 20 days. Bone marrow failure has been reported. Severe myelosuppression may be expected particularly in patients pretreated with and/or receiving concomitant chemotherapy and/or radiation therapy. 5.2 Urinary Tract and Renal Toxicity Hemorrhagic cystitis, pyelitis, ureteritis, and hematuria have been reported with cyclophosphamide. Medical and/or surgical supportive treatment may be required to treat protracted cases of severe hemorrhagic cystitis. Discontinue cyclophosphamide therapy in case of severe hemorrhagic cystitis. Urotoxicity (bladder ulceration, necrosis, fibrosis, contracture and secondary cancer) may require interruption of cyclophosphamide treatment or cystectomy. Urotoxicity can be fatal. Urotoxicity can occur with short-term or long-term use of cyclophosphamide. Before starting treatment, exclude or correct any urinary tract obstructions [see Contraindications ( 4 )] . Urinary sediment should be checked regularly for the presence of erythrocytes and other signs of urotoxicity and/or nephrotoxicity. Cyclophosphamide should be used with caution, if at all, in patients with active urinary tract infections. Aggressive hydration with forced diuresis and frequent bladder emptying can reduce the frequency and severity of bladder toxicity. Mesna has been used to prevent severe bladder toxicity. 5.3 Cardiotoxicity Myocarditis, myopericarditis, pericardial effusion including cardiac tamponade, and congestive heart failure, which may be fatal, have been reported with cyclophosphamide therapy. Supraventricular arrhythmias (including atrial fibrillation and flutter) and ventricular arrhythmias (including severe QT prolongation associated with ventricular tachyarrhythmia) have been reported after treatment with regimens that included cyclophosphamide. The risk of cardiotoxicity may be increased with high doses of cyclophosphamide, in patients with advanced age, and in patients with previous radiation treatment to the cardiac region and/or previous or concomitant treatment with other cardiotoxic agents. Particular caution is necessary in patients with risk factors for cardiotoxicity and in patients with pre-existing cardiac disease. Monitor patients with risk factors for cardiotoxicity and with pre-existing cardiac disease. 5.4 Pulmonary Toxicity Pneumonitis, pulmonary fibrosis, pulmonary veno-occlusive disease and other forms of pulmonary toxicity leading to respiratory failure have been reported during and following treatment with cyclophosphamide. Late onset pneumonitis (greater than 6 months after start of cyclophosphamide) appears to be associated with increased mortality. Pneumonitis may develop years after treatment with cyclophosphamide. Monitor patients for signs and symptoms of pulmonary toxicity. 5.5 Secondary Malignancies Cyclophosphamide is genotoxic [see Nonclinical Toxicology ( 13.1 )] . Secondary malignancies (urinary tract cancer, myelodysplasia, acute leukemias, lymphomas, thyroid cancer, and sarcomas) have been reported in patients treated with cyclophosphamide-containing regimens . The risk of bladder cancer may be reduced by prevention of hemorrhagic cystitis. 5.6 Veno-occlusive Liver Disease Veno-occlusive liver disease (VOD) including fatal outcome has been reported in patients receiving cyclophosphamide-containing regimens. A cytoreductive regimen in preparation for bone marrow transplantation that consists of cyclophosphamide in combination with whole-body irradiation, busulfan, or other agents has been identified as a major risk factor. VOD has also been reported to develop gradually in patients receiving long-term low-dose immunosuppressive doses of cyclophosphamide. Other risk factors predisposing to the development of VOD include preexisting disturbances of hepatic function, previous radiation therapy of the abdomen, and a low performance status. 5.7 Embryo-Fetal Toxicity Based on its mechanism of action and published reports of effects in pregnant patients or animals, cyclophosphamide for injection can cause fetal harm when administered to a pregnant woman [see Use in Specific Populations ( 8.1 ), Clinical Pharmacology ( 12.1 ), and Nonclinical Toxicology ( 13.1 )] . Exposure to cyclophosphamide during pregnancy may cause birth defects, miscarriage, fetal growth retardation, and fetotoxic effects in the newborn. Cyclophosphamide is teratogenic and embryo-fetal toxic in mice, rats, rabbits and monkeys. Advise pregnant women and females of reproductive potential of the potential risk to a fetus [see Use in Specific Populations ( 8.1 )] . Advise females of reproductive potential to use effective contraception during treatment with cyclophosphamide for injection and for up to 1 year after completion of therapy. Advise male patients with female partners of reproductive potential to use effective contraception during treatment with cyclophosphamide for injection and for 4 months after completion of therapy [see Use in Specific Populations ( 8.1 , 8.3 )] . 5.8 Infertility Male and female reproductive function and fertility may be impaired in patients being treated with cyclophosphamide for injection. Cyclophosphamide interferes with oogenesis and spermatogenesis. It may cause sterility in both sexes. Development of sterility appears to depend on the dose of cyclophosphamide, duration of therapy, and the state of gonadal function
Contraindications
CONTRAINDICATIONS Hypersensitivity Cyclophosphamide for Injection is contraindicated in patients who have a history of severe hypersensitivity reactions to cyclophosphamide, any of its metabolites, or to other components of the product. Anaphylactic reactions including death have been reported with cyclophosphamide. Cross-sensitivity with other alkylating agents can occur. Urinary Outflow Obstruction Cyclophosphamide for Injection is contraindicated in patients with urinary outflow obstruction [see Warnings and Precautions ( 5.2 )]. • Hypersensitivity to cyclophosphamide ( 4 ) • Urinary outflow obstruction ( 4 )
Mechanism of action
CLINICAL PHARMACOLOGY 12.1 Mechanism of Action The mechanism of action has not been fully characterized. However, cross-linking of tumor cell DNA may be involved. The active alkylating metabolites of cyclophosphamide interfere with the growth of susceptible rapidly proliferating malignant cells. 12.2 Pharmacodynamics Cyclophosphamide exposure-response relationships and the time course of pharmacodynamic response have not been fully characterized. 12.3 Pharmacokinetics Cyclophosphamide is a prodrug. Cyclophosphamide pharmacokinetics are linear over the approved recommended dose range. Distribution The volume of distribution of cyclophosphamide is 30 to 50 L. Cyclophosphamide is approximately 20% protein bound, with no dose dependent changes. Some metabolites are greater than 60% protein bound. Elimination The elimination half-life (t½) of cyclophosphamide ranges from 3 to 12 hours, and clearance (CL) ranges from 4 to 5.6 L/h. When cyclophosphamide was administered at 4 g/m2 (approximately 2 times the approved recommended dosage) over a 90-minute infusion, concentration-time data demonstrate saturable elimination in parallel with first-order renal elimination. Metabolism Cyclophosphamide is metabolized by cytochrome P450s including CYP2A6, 2B6, 3A, 2C9, and 2C19. Cyclophosphamide is activated to form 4-hydroxycyclophosphamide, which is in equilibrium with its ring-open tautomer aldophosphamide. 4-hydroxycyclophosphamide and aldophosphamide can undergo oxidation by aldehyde dehydrogenases to form the inactive metabolites 4-ketocyclophosphamide and carboxyphosphamide, respectively. Aldophosphamide can undergo β-elimination to form active metabolites phosphoramide mustard and acrolein. This spontaneous conversion can be catalyzed by albumin and other proteins. At high doses, the fraction of parent compound cleared by 4-hydroxylation is reduced resulting in non-linear elimination of cyclophosphamide. Cyclophosphamide appears to induce its own metabolism. This auto-induction results in an increase in CL, increased formation of active 4-hydroxycyclophosphamide and shortened t½ following multiple doses administered at 12-to 24-hour interval. Excretion Cyclophosphamide and its metabolites are eliminated by hepatic and renal pathways. Cyclophosphamide is primarily excreted as metabolites. Ten to 20% is excreted unchanged in the urine. A small percentage of cyclophosphamide may be eliminated unchanged in bile. Specific Populations Renal Impairment Following one-hour intravenous infusion, cyclophosphamide AUC increased by 38% in patients with CLcr of 25 to 50 mL/min, by 77% in patients with CLcr of 10 to 24 mL/min and by 23% in the hemodialysis group (CLcr of < 10 mL/min) compared to the control group (CLcr ≥ 80 mL/min). Cyclophosphamide is dialyzable. Dialysis clearance averaged 104 mL/min, which is similar to the metabolic clearance of 95 mL/min for cyclophosphamide. A mean of 37% of the administered dose of cyclophosphamide was removed during a 4-hour hemodialysis period. The t½ was 3.3 hours in patients during hemodialysis, a 49% reduction compared to t½ of 6.5 hours in uremic patients. Hepatic Impairment Cyclophosphamide CL is decreased by 40% (45 ± 8.6 L/kg) and t½ is prolonged by 64% (12.5 ± 1 hours) in patients with hepatic impairment with a mean bilirubin 3.5 mg/dL and mean AST 90 IU/L compared to patients with normal hepatic function (mean bilirubin 0.5 mg/dL, mean AST 10 IU/L).
Source: RxNorm + openFDA + RxClass + FAERS · 2026
Look up another medication